When are you going to fix that yeti?

Cmdr_Crimson

Well-Known Member
Tagging-on to this thread. Does anyone know if Disney World made/makes Yeti merchandise that actually looks like the Everest Yeti?

I've seen the white, cutesy merch in their gift shop. And they don't look like our Yeti at all. Perhaps more the Matterhorn Abominable Snowman...but even that isn't a match.

Funny you mention this I was at a Toys R Us recently and they sell this big Foam Abominable Snowman from Animal Planet that looks alot like the Matterhorn Yeti for $20..
animal-planet-jumbo-foam-yeti--9AD2BA31.zoom.jpg


The closest thing they have that resembles Everest Yeti is the pullback toy with Mickey..Still not sure why he's white unless it's to resemble snow all over him..
il_340x270.970996940_n47f.jpg
 

danlb_2000

Premium Member
Funny you mention this I was at a Toys R Us recently and they sell this big Foam Abominable Snowman from Animal Planet that looks alot like the Matterhorn Yeti for $20..


The closest thing they have that resembles Everest Yeti is the pullback toy with Mickey..Still not sure why he's white unless it's to resemble snow all over him..
il_340x270.970996940_n47f.jpg

Did this come with a strobe light? ;)
 

Phil12

Well-Known Member
As I stated several years ago, the problem with the Yeti is due to an unstable foundation. And the unstable foundation is not due to faulty concrete but rather the karst topography upon which the concrete base rests. They could fix the Yeti tomorrow, but it would be like throwing good money after bad because the earth under the base of the Yeti sits upon an area where the subsoil is subject to periodic, unpredictable subsidence and in a short time they'd have to shut her down again. They might design a super lightweight model but the repetitive motion will still be an issue.
 

PizzaPlanet

Well-Known Member
Funny you mention this I was at a Toys R Us recently and they sell this big Foam Abominable Snowman from Animal Planet that looks alot like the Matterhorn Yeti for $20..
animal-planet-jumbo-foam-yeti--9AD2BA31.zoom.jpg


The closest thing they have that resembles Everest Yeti is the pullback toy with Mickey..Still not sure why he's white unless it's to resemble snow all over him..
il_340x270.970996940_n47f.jpg
The sad thing is that this simple pullback toy is capable of more movement than the animatronic they spent millions of dollars on.
 

No Name

Well-Known Member
Tagging-on to this thread. Does anyone know if Disney World made/makes Yeti merchandise that actually looks like the Everest Yeti?

I've seen the white, cutesy merch in their gift shop. And they don't look like our Yeti at all. Perhaps more the Matterhorn Abominable Snowman...but even that isn't a match.

matterhorn2.jpg
images.jpg


Notice any similarities? Oh right, the marketing department uses one yeti for both rides. Why they don't design a separate westernized yeti and Nepali yeti for their respective attractions is beyond me. At least test it, see how well it sells.

Anyway, this makes fixing the yeti no easier.
 
Last edited:

HauntedPirate

Park nostalgist
Premium Member
Maybe they're hoping all of us who remember what Everest was like when it opened will die off and no one will be left to remember all of the effects that are no longer working... :cautious: Steam, a moving falcon, a moving yeti... Ahh, the good ol' days of E:E.
 

montyz81

Well-Known Member
As I stated several years ago, the problem with the Yeti is due to an unstable foundation. And the unstable foundation is not due to faulty concrete but rather the karst topography upon which the concrete base rests. They could fix the Yeti tomorrow, but it would be like throwing good money after bad because the earth under the base of the Yeti sits upon an area where the subsoil is subject to periodic, unpredictable subsidence and in a short time they'd have to shut her down again. They might design a super lightweight model but the repetitive motion will still be an issue.
Where did you read this?
 

NearTheEars

Well-Known Member
As I stated several years ago, the problem with the Yeti is due to an unstable foundation. And the unstable foundation is not due to faulty concrete but rather the karst topography upon which the concrete base rests. They could fix the Yeti tomorrow, but it would be like throwing good money after bad because the earth under the base of the Yeti sits upon an area where the subsoil is subject to periodic, unpredictable subsidence and in a short time they'd have to shut her down again. They might design a super lightweight model but the repetitive motion will still be an issue.

I don’t think any of that is true lol.
 

danlb_2000

Premium Member
As I stated several years ago, the problem with the Yeti is due to an unstable foundation. And the unstable foundation is not due to faulty concrete but rather the karst topography upon which the concrete base rests. They could fix the Yeti tomorrow, but it would be like throwing good money after bad because the earth under the base of the Yeti sits upon an area where the subsoil is subject to periodic, unpredictable subsidence and in a short time they'd have to shut her down again. They might design a super lightweight model but the repetitive motion will still be an issue.

Source?
 

sedati

Well-Known Member
We know the Yeti is the protector of the forbidden mountain, but what is he protecting exactly?

I try to avoid armchair imagineering here, but if money were no object I'd move the Yeti to the helix (preferably putting inside of expanded rock-work.) There he could swipe away at us multiple times and we'd be afforded a much better look at the menacing marvel as we circle around. Then in the final section where the Yeti currently resides, instead of having something dark and foreboding, I'd give a glimpse of what he's been steadfastly trying to steer us away from, something beautiful and magical- such as a depiction of the hidden kingdom of Shambhala.
 

lazyboy97o

Well-Known Member
We know the Yeti is the protector of the forbidden mountain, but what is he protecting exactly?

I try to avoid armchair imagineering here, but if money were no object I'd move the Yeti to the helix (preferably putting inside of expanded rock-work.) There he could swipe away at us multiple times and we'd be afforded a much better look at the menacing marvel as we circle around. Then in the final section where the Yeti currently resides, instead of having something dark and foreboding, I'd give a glimpse of what he's been steadfastly trying to steer us away from, something beautiful and magical- such as a depiction of the hidden kingdom of Shambhala.
The yeti is protecting nature. Protecting a man-made city would be a contrast to the story of the attraction and park.
 

sedati

Well-Known Member
The yeti is protecting nature. Protecting a man-made city would be a contrast to the story of the attraction and park.
Shambhala is more a city of living gods, but your point stands. I latched onto that because it is also known as the forbidden city.

Either way, I think to be true to the park's spirit, the climax of the ride should not be a monster reveal, but rather a signifier of that being's purer nature. Show us what it is he/she is protecting. If that is meant to be pristine nature, then have the final scene be some sort of breathtaking reveal of the untouched Himalayas- something perhaps like the Grand Canyon Diorama in Disneyland.
 

Disney Lover Addie

Well-Known Member
Well to fix the Yeti, they would have to take A WHOLE CHUNK of the Expedition Everest Mountain out. If they were to fix it, it would not happen anytime soon.
 

Register on WDWMAGIC. This sidebar will go away, and you'll see fewer ads.

Back
Top Bottom