D23 Epcot Forever Poster Series

DreamfinderGuy

Well-Known Member
For any Disney or Cyclops cast members trolling the boards here's what you should print for the remaining 8 and some you should extend the run for. It'll make the fans happy, hit the best legacy/existing attractions and the new attractions that good marketing practice demands be featured. Save for the last two they should all have enough demand to make some money/keep the printworks busy:

W/S
1 - Gran Fiesta Tour
2 - Maelstrom
3 - Ratatouille
4 - Illuminations
W/D (there are only 4 in this neighborhood anyway)
5 - Millenium Celebration
6 - Communicore
7 - Imagination
8 - SSE
Extension Run
9 - UOE
10 - Test Track
11 - Frozen
12 - Play! and/or Harmonious (should have an idea @ restart of Play! and if Harmonious is a bust or winner by then)
Millennium is more of a Showcase thing but I hope it gets printed with the Celebration run, especially considering there’s only four there and one of them didn’t get printed the last time. Play and Harm really bombed with the last prints in terms of popularity so I highly highly doubt they would redo those, I’d love to see reprints of say, World of Motion and Kitchen Kabaret or something in their place.
 

trainplane3

Well-Known Member
For any Disney or Cyclops cast members trolling the boards here's what you should print for the remaining 8 and some you should extend the run for. It'll make the fans happy, hit the best legacy/existing attractions and the new attractions that good marketing practice demands be featured. Save for the last two they should all have enough demand to make some money/keep the printworks busy:

W/S
1 - Gran Fiesta Tour
2 - Maelstrom
3 - Ratatouille
4 - Illuminations
W/D (there are only 4 in this neighborhood anyway)
5 - Millenium Celebration
6 - Communicore
7 - Imagination
8 - SSE
Extension Run
9 - UOE
10 - Test Track
11 - Frozen
12 - Play! and/or Harmonious (should have an idea @ restart of Play! and if Harmonious is a bust or winner by then)
The run is already locked in. Plans aren't going to change for better or worse.

Don't forget the previous World Celebration release and what it included:
 

Surferboy567

Well-Known Member
The run is already locked in. Plans aren't going to change for better or worse.

Don't forget the previous World Celebration release and what it included:
Not sure if you can answer, but can we expect Imagination and Spaceship Earth in World Celebration? Since they are not listed in that article

EDIT: I would expect so, but can’t be sure
 
Last edited:

DoleWhipDrea

Well-Known Member
These beautiful serigraphs haven't really been budget-friendly for me until just recently, so I'm really excited to have just ordered the Horizons poster! Can't wait to display it in my office space :)
 
Here's your chance for anyone that hasn't ordered Horizons and MissionSpace serigraphs that is on the fence (if you and a buddy both need the pair 😆). Total comes to $316.30 for the 4 with S/H and taxes.

ECC42C3C-A86D-4249-A071-D6678838020E.jpeg
 

projectgamma

Active Member
I feel like a giant, awful idiot. I was flattening out the living seas serigraph and was worried that water from the hurricane would seep into where it is staged. I accidentally two slightly damp rags on top of the back side of it and now there is some warp/bubble damage on it. AT that time they felt completely dry. The art is fine, it just has a bubble for now. I am hoping it flattens out though. Does anyone have any ideas on how to restore it? o_O
 
Last edited:
I feel like a giant, awful idiot. I was flattening out the living seas serigraph and was worried that water from the hurricane would seep into where it is staged. I accidentally two slightly damp rags on top of the back side of it and now there is some warp/bubble damage on it. AT that time they felt completely dry. The art is fine, it just has a bubble for now. I am hoping it flattens out though. Does anyone have any ideas on how to restore it? o_O
You have any pictures you can post?

In my experience papers and cardstock will sometimes revert to their original shape when dried out IF lightly pressed to the flat shape. Biggest concern would be making sure whatever you use to press against the side with the ink doesn't stick as humidity or light moisture can sometimes soften the inks a bit and makes them tacky.

The folks at Cyclops might have some tips. They've been super helpful and responsive in the past when I've contacted them about anything.
 

projectgamma

Active Member
You have any pictures you can post?

In my experience papers and cardstock will sometimes revert to their original shape when dried out IF lightly pressed to the flat shape. Biggest concern would be making sure whatever you use to press against the side with the ink doesn't stick as humidity or light moisture can sometimes soften the inks a bit and makes them tacky.

The folks at Cyclops might have some tips. They've been super helpful and responsive in the past when I've contacted them about anything.
We have put paper towels and a big book on top of it. So far it has drastically improved. There is still a big bubble but we hoping it will work.
 

Attachments

  • 20210707_174027.jpg
    20210707_174027.jpg
    44.6 KB · Views: 77
  • 20210707_174036.jpg
    20210707_174036.jpg
    91.4 KB · Views: 75
We have put paper towels and a big book on top of it. So far it has drastically improved. There is still a big bubble but we hoping it will work.

Looks like you are on the right track with the paper towel layer to help keep the ink side from sticking to anything. I'd keep the largest flattest surfaces you can find on both sides to continue pressing it and be careful that they are smooth surfaces. The texture of LVT wood floors, tile, and joints between flooring surfaces can sometimes telegraph through to the paper or items being pressed against them. Best of luck on rehabbing it.
 

projectgamma

Active Member
Looks like you are on the right track with the paper towel layer to help keep the ink side from sticking to anything. I'd keep the largest flattest surfaces you can find on both sides to continue pressing it and be careful that they are smooth surfaces. The texture of LVT wood floors, tile, and joints between flooring surfaces can sometimes telegraph through to the paper or items being pressed against them. Best of luck on rehabbing it.
I feel like a giant, awful idiot. I was flattening out the living seas serigraph and was worried that water from the hurricane would seep into where it is staged. I accidentally two slightly damp rags on top of the back side of it and now there is some warp/bubble damage on it. AT that time they felt completely dry. The art is fine, it just has a bubble for now. I am hoping it flattens out though. Does anyone have any ideas on how to restore it? o_O

We have put paper towels and a big book on top of it. So far it has drastically improved. There is still a big bubble but we hoping it will work.
I have to say there is no water damage to it whatsoever. We got to it in time. Thanks everyone!
 

trainplane3

Well-Known Member
Next week. It’s always the third monday of the month.
To add, I've been doing my usual digging around and haven't found any traces of the next series. They usually do initial info adds a week before release and then images about 3 hours prior to sales opening. Descriptions sometimes happen at the same time as the initial add or a week later. Then again they could change that.

As far as release order, ShopDisney usually has the product numbers in release order but it was different last time. It looked like it was supposed to be GotG, M:S, and then WoL with Horizons. Obviously it didn't happen that way.
 

Register on WDWMAGIC. This sidebar will go away, and you'll see fewer ads.

Back
Top Bottom