Space Mountain Stats....

[DarkMeasures]

I want to build it in RCT2 but I want some help.
I would need,
Ride stats.
Hight of top of building (not spires), Height of Spires, hight of walls before cone part. How deep the ride is, Number of trains, and soforth.
I also want Blueprints of the Line inside and other stuff like the chicken exit.

I haven't ridden in a while and my memory is rusted.

 

[77johnson77]

Maximum Speed 32mph
Lift Height ?
First Drop Height ?
Track Length 3459'
Inversions 0
Maximum G-force ?
Number of Trains 12
Number of Passengers/train 12
Ride Time 2:48
Builder WED
Date Opened 5/27/77
Cost ?
, thanks to coasterphotos.com

 

[77johnson77]

Type: Steel
Manufacturer: *---Other---
First Season: 1975
Height: 180 ft. / 54.9 m
Speed: 29 mph / 46.7 m
Track Length: 3196 ft./ 974.1 m
Vehicles: 20
Riders Per Vehicle: 6
Ride Time: 2:40
Notes: Mfg: In-house and/or Vekoma
, sorry if I already said some of these im just searching the sites and deliverin

 

[DarkMeasures]

Well that wasn't much of a help.

I know the track height is 90 feet and I know that the building diameter's at least 300 feet.

 

[Lee]

The top spire is 180ft.
The diameter is over 300ft.
Floor area is 72,000sqft.
Alpha (Left) track is 3,196ft.
Beta (Right) track is 3,186ft.
Top speed 28mph.

Break room phone number 407-824-9787

 

[marni1971]

Charming!

Official:

300 feet in diameter
15 ft below ground (195ft total height)
72 concrete ribs supporting roof, each 74 tonnes
Each rib 117 ft long, 13 ft wide at base, 4 ft wide at top

Elevator to top of track on B side

Total track length: Alpha: 3,186 feet, Omega: 3,196 feet

If you ask nicely I may post the 2D and 3D plans I have of the Mountain.

 

[PhotoDave219]

At the wait time last night at 10 PM was still an Hour... :lol:

 

[Steamboat_Kevin]

Originally posted by DarkMeasures
Well that wasn't much of a help.

:brick:

 

[DarkMeasures]

Originally posted by marni1971
If you ask nicely I may post the 2D and 3D plans I have of the Mountain.

Marni, will you please post the 2D and 3D plans for the ride?

I have forgotten several parts because it's bee around 9 months since I last rode it.

And also, does anyone have the plans for the line?

 

[marni1971]

Thank you for asking. Manners will get you a long way on this board!

I will dig them out and post them- probably tomorrow. I will paste a link here when they are up.

 

[DarkMeasures]

Thanks.

 

[lentesta]

Man, that's why I love this board. I mean, we could probably get Space Mountain's building details from lots of places. But the phone number to the break room and 2D and 3D plans for the ride? Of course someone here has them. You guys are a national asset.

Len

 

[PhotoDave219]

Hell, we're an intelligence agency. We have spies everywhere.... :lol:

 

[Steamboat_Kevin]

Originally posted by PhotoDave219
Hell, we're an intelligence agency. We have spies everywhere.... :lol:

SSSHHHH!!!! :lookaroun

 

[BenS]

Originally posted by 77johnson77
Manufacturer: *---Other---

They make some nice rollercoasters :lookaroun

 

[DarkMeasures]

Well I started construction in RCT2 but I had to make sacrifices.

1. The building diameter is now 310 feet instead of my 330 feet so it's more like the original. (300 feet would be a dumb idea in RCT2)
2. The building goes 20 feet deep instead of 15 so that I can place the roof over easier.

Anyway, does anyone know the height of where the cone starts and the height of when it reaches the top? And anyone know the cone's angle of rise? And how big the circle piece on top is?

 

[marni1971]

I`m just sorting out the track layout now. I will also post a construction pic that show the roof piece (disc) to give an idea of scale.

 

[DarkMeasures]

Thank you. I will make sure to post special thanks when I am done.

 

[marni1971]

If you look in my photo album http://photoalbums.wdwmagic.com/showgallery.php?cat=500&ppuser=6710
you will find 3 construction pictures I don`t think have been posted here before, and also 3 plans;

The SM track layout is 100% accurate, the WEDWay / TTA plan is virtually right, and the walkway layout is pretty much there, but if anyone can clarify the points I`ve made with each picture please feel free.

There are also 2 3D track drawings - they are not mine, I got them from the web, but I have reposted them to help you - download these 2 pics ASAP as I will remove them tomorrow.

Hope this helps you... the layout questions have opened up a whole new can of worms for me!

 

[DarkMeasures]

Thanks a lot. This will be my most accurate reconstruction yet. I believe it is either my 3rd or 4th time doing so. But the previous times were from memory but then again I rode the ride at least 50 times.

When I am done, I will post screens and if you have RCT2, I'll send you the file.