I wanted to share this.

[BenS]

I was frustrated today when I was using my "Mickey Mouse Ice Cube tray" that I got at WDW (you've probably seen them, they're bendy and red). If you have one, you'll know that moving the earth is much easier then getting a cube out of one of those things. After I finally got it out (which made it fly into my chin) I decided to make this based on the recent experience.

Enjoy.

 

[aim]

:lol: That's funny! Too bad the tray doesn't work too well!

 

[mkepcotmgmak]

cvq - that was pretty funny! - what program did you use to make it?

 

[Erika]

That's great :lol:

 

[SpongeScott]

try this--turn your tray upside down, run some water over the bottom of the tray and then try to pop your cubes out. They should pop right out now.

Or you can very lightly spray your trays with PAM and they should pop out then.

Didn't know I was so domesticated, did you?

 

[tigsmom]

Originally posted by SpongeScott
try this--turn your tray upside down, run some water over the bottom of the tray and then try to pop your cubes out. They should pop right out now.

Or you can very lightly spray your trays with PAM and they should pop out then.

Didn't know I was so domesticated, did you?

Just make sure its unflavored Pam...nothing worse than olive oil flavored ice (or JELL-O ; and no I didn't do it)

 

[Debbie]

Originally posted by SpongeScott
try this--turn your tray upside down, run some water over the bottom of the tray and then try to pop your cubes out. They should pop right out now.

Or you can very lightly spray your trays with PAM and they should pop out then.

Didn't know I was so domesticated, did you?

Reminds me of 'back in the day' when we had those old aluminum ice cube trays. First the ones that the cubes had to be loosened with the bottle opener, then the trays with the handles, that you pulled the handle to loosen the cubes. It was tough for a kid to get an ice cube!

 

[kal1484]

That's GREAT!!! Good job!
:sohappy:

 

[BenS]

Originally posted by mkepcotmgmak
cvq - that was pretty funny! - what program did you use to make it?

KoolMoves. It's $40 software I bought to use for something on my website.

 

[monorail256]

Good Job! Thats pretty neat... I visited your site this morning and joined the forums. Looks like I now have found two Disney sites to post on!

 

[Maria]

Originally posted by Debbie
Reminds me of 'back in the day' when we had those old aluminum ice cube trays. First the ones that the cubes had to be loosened with the bottle opener, then the trays with the handles, that you pulled the handle to loosen the cubes. It was tough for a kid to get an ice cube!

My grandma still has them! They are amusing, aren´t they? :lol:

Water running on them is the easiest way to get the ice cubes out, I think.

 

[BenS]

Originally posted by monorail256
Good Job! Thats pretty neat... I visited your site this morning and joined the forums. Looks like I now have found two Disney sites to post on!

:sohappy: :sohappy: THANK YOU!!! :sohappy: :sohappy:

My new member count has been slowing to a trickle lately.

 

[MicBat]

CVQ, Ben!! I used to put Kool-Aide in mine... the ears would always come off!

 

[BenS]

Originally posted by MicBat
CVQ, Ben!! I used to put Kool-Aide in mine... the ears would always come off!

Yeah, getting the ears to stay on is basically impossible in most situations.